VirtualBox and Windows Server 2019: Your Installation Roadmap
VirtualBox and Windows Server 2019: Your Installation Roadmap
Blog Article
Installing Windows Server 2019 in a virtual environment enables you to practice, test, and configure without affecting your primary system. A well-known, open-source virtualization platform that enables you to run a number of operating systems on your computer is VirtualBox. I'll walk you through the steps to installing Windows Server 2019 on VirtualBox in this guide. Let's get things going!
Conditions must be met:
Make sure you have the following before you begin:
Having VirtualBox installed on your computer. From the official website, you can download it.
a version of the ISO record for Windows Server 2019 that can be saved from Microsoft's Evaluation Center.
For maximum efficiency, at least 4 GB of RAM, 2 CPU components, and 50 Megs of free disk space are suggested.
Install VirtualBox in Step 1.
If you have n't already set up VirtualBox, follow the steps below:
- Visit the VirtualBox website to download the VirtualBox installer for your operating system( Windows, MacOS, or Linux).
- Move the software and follow the instructions to complete the installation.
- Launch VirtualBox once the installation is finished.
Step 2: Make a New Virtual Machine
Create a new virtual machine (VM ) for Windows Server 2019 now that VirtualBox has been set up.
- Create a new digital system by visiting the" New" option in VirtualBox when you start it.
Give the VM a descriptive name like "Windows Server 2019" and give it a name. You can also specify the location of the VM's storage folder.
- Operating System Type
Change the kind to" Microsoft Windows" and push OK.
If Windows 2019 ( 64-bit ) is not available, set the version to" Windows 2019 ( 64-bit )" or choose Windows 2016 instead.
- Memory (RAM): At least 2048 MB( 2 GB), but 4096 MB( 4 GB or higher is suggested for better performance.
- Virtual Hard Disk: Select" Create a digital hard drive now" and therefore log" Create. "
Step 3: Setup the Virtual Hard Disk
VirtualBox will enable you to create a digital hard push on which to deploy Windows Server 2019.
Choose the default option, "VD I( VirtualBox Disk Image), "from the list below.
Choose "Dynamically allocated" to save space on your host machine when selecting storage on physical hard drives. Only the necessary amount of disk space will be used by this.
- Determine the disk size: At least 50 GB of storage is assigned. If required, you may specify more.
- Click" Build" to finish building up the hard drive.
Step 4: Install the ISO of Windows Server 2019
The ISO document may be mounted for Windows Server 2019 to get installed.
Select your previously created VM from the VirtualBox primary software and press" Options".
- Go to the "Storage" tab in the storage section of the settings window.
Mount the ISO:
An empty optical drive ( this is a virtual CD/DVD drive ) will appear under the" Storage Devices" section.
Select" Pick a plate file", then visit the small disk image next to" Optical Drive", and subsequently click on the bare travel.
Find the area where your Panels Server Crowdstrike 2019 ISO is kept and go to that area.
To close the settings window, click "OK."
Step 5: Set up the virtual machine
You are now prepared to begin Panels Server 2019 setup.
- Start the electronic machine: Choose the digital machine and press" Start. "
- Start Installation: You'll be prompted to begin the installation process by the Windows Server 2019 ISO report.
Step 6: Windows Server 2019 Installation
We'll then go over the process for setting Windows Server 2019.
Choose your preferred language, time style, and console output process, then click" Next", and then pick" English and Region Settings. "
- Install Now: To begin the installation, click the" Install Now" button.
- Select the Version: You will be asked to choose a 2019 Windows Server version. The "Standard( Desktop Experience)" version, which has a GUI, is suggested for the majority of users.
Accept the license terms and click "Next" to complete the license agreement.
When prompted for an installation type, choose "Custom: Install Windows Only( Advanced)".
You'll see the virtual hard drive you created earlier when you click Disk. To start the installation, select it and click "Next."
Step 7: Finish the installation
It will take some time for the installation to be finished. Once everything is finished, Windows Server 2019 will automatically restart and finish the setup.
- Create a password for the Administrator account: After the reboot, you'll be prompted to do so. Choose a strong password, then click "Finish."
- Log in: Use the Administrator credentials you just created to access Windows Server 2019.
8: Post-Installation Configuration
There are a few things you might want to do once logged in to finish up the setup:
Install the VirtualBox Guest Additions: To increase the performance of your VM and allow features like shared folders and clipboard sharing, mount the following.
In the VM's window, click" Devices" and choose the" Insert Guest Additions CD image. "
Install Guest Additions and reset the VM applying the on-screen guidelines.
- Windows Updates: Check for updates by going to the "Settings"> "Update& Security" menu to make sure Windows Server 2019 is up-to-date.
- Network Configuration: Depends on how you intend to use the site, you can alter the system options.